e-Boost Booster System

The Global Water e-Boost pressure booster range is the state-of-the-art fully integrated booster system providing ultimate performance and reliability. Fully automatic, the modular design allows the flexibility of adding additional modules as required.  

Features of the e-Boost pressure booster range include:  

  • digital programmable variable frequency controller
  • in-built system and pump protection and diagnostics, including recording running hours and login and system alarms
  • integrated shaft start and soft stop functions, extending the life of the system and reducing peak absorption
  • RS485 communication protocol
  • BMS alarm outputs for over-current, thermal trip, under-pressure, excess pressure, no load, dry run, pressure sensing, under/over voltage, inverter over temperatures, no communication, and keyboard faults
  • cascade control logic and feed-back loop control
  • digital display for simple set-up and monitoring
  • individual variable frequency drives to maximise reliability
  • stainless steel pipework for maximum corrosion resistance
  • fully assembled and pre-tested on-site for simple installation and commissioning 



The DrainAce Compact is commonly found in restaurants, basements of high-rise buildings, boardrooms, laboratories, doctor or dental surgeries, construction sites and portable buildings. Units are also available for greasy waste discharge from grease arrestors. 


Global Water’s e-Boost Pressure System is suitable for the following applications: 

Water supply and pressure boosting
  • multi-story buildings
  • hotels
  • residential housing estates
  • rainwater reuse reticulation
  • municipal water supply networks
  • pressure boosting for industrial complexes
  • washing and cleaning systems
  • car washing facilities
  • fire fighting systems
  • process water systems
  • machine cooling circuits
Heating, ventilation and air-conditioning
  • boilers
  • induction heating
  • heat exchangers
  • refrigeration
  • cooling towers and systems
  • humidity control systems
Irrigation and agriculture
  • greenhouses
  • sprinkler irrigation
  • flood irrigation
Water treatment
  • water softeners and demineralisation
  • reverse osmosis
  • treated water reuse
  • filtration and ultra-filtration systems




Giving instant pressurised flow from shut-off through to maximum rated capacity, the e-Boost integrated process controller monitors demand and seamlessly paces system output. This is achieved by adjusting pump speed and varying the number of duty pumps to ensure consistent constant pressure.  

Cascade control logic ensures running hours are evenly distributed across the whole system, and inbuild system monitoring and feedback loop ensures maximum reliability and efficiency.  

Components of the e-Boost Booster system include:

Pumps: The Global Water EB series multi-stage pumps are non-self-priming vertical multi-stage pumps of inline design, fitted with flanged or Victaulic equally sized suction and discharge ports. Multi-stage construction with 304 stainless steel impellers, chambers and pressure casing, and cast-iron pump head and base. Units can be supplied in all 304 and 316 stainless steel construction for superior corrosion resistance if required. Pumps stub shaft and motor shaft of the IEC-standard motor are directly close coupled. All pumps are equipped with cartridge type mechanical seal for easy maintenance.  

Electric motors: the electric motors used in the e-boost range offer operators the following: 

  • squirrel cage, aluminum or cast iron frame up to 45 kW, totally enclosed, fan-cooled, 2-pole standard or high efficiency motor
  • enclosure class: IP55
  • insulation class: F
  • kW, 220-240 V or 380-415 V. 11kW: 380-415 V
  • motor efficiency values fall within the range referred to as MEPS2
  • ambient temperature maximum +50 °C
Available options

There are a wide range of options available with the e-Boost pressure system, including:

  • up to 8 pumps per system
  • RainAce
  • combination of variable speed and DOL pumps
  • systems in all 316 stainless steel construction
  • flange connections
  • vibration eliminators
Servicing South Australia

The Global Water eBoost is considered by the industry to be a premium water pressure pump system in South Australia and other regions for a wide range of applications, including: 

  • washing and cleaning 
  • water supply 
  • irrigation & agriculture 
  • fire protection 
  • temperature control systems 

These high-performing pumps provide instant and automated pressurized discharge with integrated start and soft stop functions, which extend the life of the system and reduce peak absorption. 

The pump boasts stainless steel construction for corrosion resistance. With custom options available, a water pressure booster pump from the eBoost range can have up to 8 pumps for high flows, with a combination of either variable speed and Direct On Line (DOL) control methodology. 

Servicing the Northern Territory 

With a reputable range of carefully engineered products, Global Water are the expert team to approach about your water pressure booster pump in the Northern Territory. We only stock products that have been tried and tested in local conditions to offer exceptional performance in portable water transfer.  

We tailor configurations of our water booster pumps to meet the functionality requirements of any job. We tailor the configurations of our water booster pumps to meet the functionality requirements of any job. The products we stock are part of the eBoost range, selected to suit project needs and with out new HydroTouch controller, are capable of managing supply to meet varying demand. 

The pumps include: 

  • 7-inch-wide touch screen display
  • setpoint ramp
  • easy set-up wizard
  • 316 stainless steel pipework for maximum corrosion resistance
  • Optional protective cooling shroud for over-temperature protection 

These products are used widely across applications like standard water supply and pressure boosting, washing and cleaning systems, water treatment, and irrigation and agriculture. For any projects based in Northern Territory, contact our team to find the best suited water pressure booster pump.


Register now for access to our product drawing library

You will be granted permission to view our PDF and DWG files of selected pump stations and pressure systems.

Enquire here for more information or to request a quote: